Logo
[ print | close
Panel-PC 3

Haswell-Processor


Box-Version without Display


Panel-PC 3 with 21,5" Display for maritime Applications

The Panel-PC 3 is a modular and scalable industrial computer with display front panel. It is designed for installation in enclosure doors. Therefore, all connections are made on the rear side from the bottom.

Thanks to the modular construction of the Panel-PC, its front side can freely be designed, following the customers’ request. At choice are, for example, front panels from stainless steel, powder-coated steel, or aluminum front panels with membrane keyboard and touchpad. Client-specific designs are possible, also for smaller quantities. High-quality TFT displays are installed with sizes from 10.4" to 21.5". The backlight is realized using long-life LED technique. For maritime applications, it can strongly be dimmed.

Le

The Panel-PC is supplied with capacitive touch sensor, to assure user-friendly input. For protection from moisture, and for improved image quality, the display features optical bonding between touch sensor and antireflective cover glass. At all variants, the front side protection meets IP65.

Actually, four Dual-Core processors are available from the Intel "Haswell" family (TDP 15W): Celeron with 1.6GHz clock frequency, Core-i3 with 1.7GHz clock frequency, Core-i5 with 1.9GHz clock frequency and Core-i7 with 1.7GHz clock frequency. These processors are part of Intel’s Embedded product range which grants long-term availability for five years, or more.

The well thought-out cooling concept features fully passive cooling of all components, across a wide range of operating temperatures between -15 and 55°C. No maintenance-demanding fans are applied.

For power supply, the Panel-PC has a wide-range 24V-DC input. The concept of the Panel-PC is completed by its optional equipment with WLAN, Bluetooth and Solid-State drives (SSD).

txt Technical Data in Short:
  • Stainless steel housing designed for installation in enclosure doors
    Dimensions of front part depend on display size and equipment
    Dimensions of electronic frame (W x H x D): about 200 x 155 x 78mm, plus connector area
  • Processors Celeron, Core-i3, Core-i5 or Core-i7 from the Intel "Haswell" family, passively cooled
  • Front panel from stainless steel, power-coated steel, or aluminum, protection class IP65
  • Membrane keyboard, LEDs, touchpad and design as per clients‘ demand
  • TFT display 10,4"...21.5" with optical bonding of touch sensor and cover glass
  • LED backlight, can be dimmed in a wide range, manual setup via keys, or automatic brightness control by light sensor
  • Capacitive Multitouch sensor
  • External connections are plugged on the rear side, from below
  • Two Gigabit Ethernet controllers with RJ45 receptacles on the connection side
  • On-board CompactFlash socket, memory card can be exchanged from outside
  • Serial interface COM1 as RS232 (DSUB9 male)
  • Serial interfaces COM3 and COM4 as RS485 or RS422, opto-decoupled, short circuit protected and protected from overvoltage (Combicon)
  • Two USB 3.0 interfaces with up to 5GB/s on the connector side
  • One USB 2.0 interface with up to 480MB/s on the connector side, optionally one USB connection on the front panel
  • Additional digital monitor to be connected via standard DVI-D receptacle
  • Hardware monitor for survey of temperatures and voltages
  • Slot for a PCIe Mini Card module, or for a mini-SATA module
  • HD audio controller with outputs for up to two speakers on the front panel
  • Bluetooth and WLAN, as per assembly variant
  • Power supply with wide-range input 18…36VDC, connection can be plugged via Combicon connector
  • Operating temperature from -15 to 55°C (short-time 70°C), relative humidity 10-95% non-condensing
  • Meets the demands of Germanischer Lloyd (DNV GL SE) for environment category C
Order Numbers:
377.000000.000 0 Panel PC 3 PCAP 21,5" 1,6GHz 2GB
377.000000.001 1 Panel PC 3 PCAP 12" 1,6GHz 2GB
Janich & Klass · Computertechnik GmbH · Zum Alten Zollhaus 24 · D-42281 Wuppertal